Meaning
Mechanical seal fills the space between two or more mating surfaces to prevent leakage from or into the joined objects while under compression. An elastomeric gasket utilizes the resilient properties of polymers to maintain a tight barrier despite surface irregularities. It functions effectively across a specific range of temperatures and pressures defined by the base material.
Material Recovery
Elastic memory allows the part to return to its original shape after the compressive load is removed. The elastomeric gasket relies on this property to maintain a seal during thermal cycling where joint gaps expand and contract. Ethylene propylene diene monomer is frequently selected for its resistance to heat.
Compression Force
Load requirements dictate the thickness and hardness of the material needed to achieve a fluid-tight joint. If an elastomeric gasket is over-compressed, the polymer chains may suffer permanent deformation known as compression set. This state leads to a loss of sealing force over time and eventual leakage at the interface.
Chemical Compatibility
Solvent resistance prevents the seal from swelling or degrading when it comes into contact with oils or electrolyte vapors. Every elastomeric gasket must be matched to the specific fluids present in the application to avoid premature failure. Viton or other fluoropolymers are used when aggressive chemicals are present at high temperatures.
Selecting the wrong polymer grade can result in the material hardening and cracking under stress. This degradation often causes a total loss of containment within a few months of operation.