Meaning
Unwanted height variance around the rim of a pressed metal cup defines the material response to anisotropic stress during forming. Deep drawing earing happens because grains in the sheet metal align in a preferred orientation during rolling, causing the material to flow into the die at different rates along various axes. Manufacturers assess this phenomenon by measuring the difference between high and low points after the drawing operation is finished.
This measurement informs decisions regarding the suitability of coil stock for symmetrical parts.
Forming Deviation
Residual stress patterns determine the geometry of the cup edge after the blank slides into the cavity. Anisotropy coefficients quantify the ratio of width strain to thickness strain in the sheet metal. Low r values indicate a tendency to thin excessively, while high r values suggest resistance to thinning.
Variations in these values across the rolling direction create the characteristic wave pattern. Engineers modify heat treatment cycles or change rolling temperatures to soften these directional properties. Successive stages of drawing help normalize the flow, though they do not eliminate the root cause of the irregularity.
Material Constraint
Microstructural texture governs how the metal behaves under the heavy compressive forces of the tool. Recrystallization during annealing influences the final grain size and distribution. Uniformity in the crystallographic orientation prevents the accumulation of excess material at four, six, or eight locations around the circumference.
Producers specify the texture requirements in the initial supply contract to limit trimming costs later in the production line. Precision in the chemical composition also plays a role in stabilizing the crystal structure before the metal reaches the press.
Production Quality
Excess height requires additional trimming steps that consume time and waste high quality raw material. Automated inspection systems detect these profiles by rotating the finished cups under laser sensors to calculate the deviation amplitude. High amplitude results force a recalibration of the blank holder force or a change in lubricant application to balance the draw.
Stable results verify that the sheet metal possesses the necessary ductility for deep drawing applications. Precise control of earing remains the primary method for verifying the consistency of cold rolled strip.