Meaning
Empirical mean stress adjustment algorithms calculate structural fatigue durability under asymmetric cyclic load profiles where mean stresses deviate from zero. Applied to battery pack enclosures, cell terminal interconnects, and module framing, the morrow correction modifies the elastic component of strain life equations to capture the damaging effects of tensile mean stress or the protective effects of compressive mean stress. The calculation shifts cyclic endurance curves according to the ratio of true mean stress to material fatigue strength coefficients.
The relation ceases to yield reliable results under high plastic strain regimes, where plastic strain energy rapidly relaxes mean stresses toward zero.
Mechanical Formulation
Mean stress impacts cyclic endurance by altering the crack initiation phase during dynamic cyclic loading. The analytical approach substitutes true mean stress directly into the elastic segment of the baseline strain-life relationship. Mathematically, the fatigue strength coefficient undergoes a linear reduction proportional to the applied tensile mean stress.
When compressive mean stresses occur, the adjusted strength coefficient increases, projecting extended component lifecycles. Plastic strain components remain unadjusted under the assumption that macroscopic plastic deformation induces rapid mechanical stress relaxation.
Boundary Limits
Dynamic strain cycles characterized by large plastic strain amplitudes generate localized yield phenomena that quickly erode residual mean stresses. Under these plastic conditions, the formula overestimates the damaging effect of applied tensile baseline loads. For ductile metals displaying strong cyclic softening, mean stresses fade within the initial cycle blocks, rendering mean stress offsets redundant.
High-strength aluminum alloys and steels retaining high elastic-to-plastic ratios conform accurately to the correction throughout low and high-cycle regimes. Selecting the correction requires verifying that cyclic operational stresses remain predominantly within elastic limits.
Battery Pack Reliability
Structural enclosures and electrical interconnects in heavy battery packs endure steady-state vibrational spectra interspersed with transient shock events. Pre-tensioned assembly bolts, compressed silicone gaskets, and formed structural busbars operate under severe baseline tensile stresses. Uncorrected fatigue models underestimate cyclic fatigue damage on welded pack seams, leading to premature mechanical cracking and loss of internal pack ingress protection.
Cracking along external joints allows water ingress, initiating thermal runaway events or high-voltage ground isolation faults. Procurement contracts for automotive battery packs mandate validated fatigue assessments incorporating mean stress corrections to approve structural chassis designs.