Meaning
Thermodynamic evolution of new crystallographic structures at the interface of different metals occurs due to solid-state diffusion and chemical reaction. In copper-aluminum joints used in battery terminals, phase growth results in the development of intermetallic compounds that alter the joint’s properties.
Reaction Mechanism
High temperatures experienced during operation or weld fabrication trigger the reorganization of metal atoms at the joint interface. This phase growth starts with the nucleation of sub-micron crystals of intermetallic compounds like CuAl2 or Cu9Al4. These newly formed compounds are hard and brittle, differing significantly from the ductile metals they originate from.
The expansion of these phases reduces the effective contact area of the ductile metals, increasing electrical resistance.
Component Sourcing
Sourcing specifications often limit the allowable storage temperature of completed cell assemblies to slow down this material transition. Because phase growth is highly sensitive to heat, exposing welded packs to elevated temperatures accelerates the degradation of the joint. Engineers set operating temperature limits to ensure that the brittle intermetallics do not reach a thickness where they jeopardize joint stability.
Choosing optimal current profiles also prevents localized heating that would drive this transition.
Analysis Method
Characterizing this material progression requires cross-sectioning the joint and measuring the thickness of the reaction layer. Optical and electron microscopes reveal the morphology of the intermetallic zones formed by phase growth. Energy-dispersive X-ray spectroscopy identifies the specific phases present by determining the atomic ratio of copper to aluminum.
Combining these analytical tools allows manufacturers to track the rate of the reaction and adjust their design parameters accordingly.