Meaning
Measurement of the ratio of reflected sound energy to incident sound energy at a material boundary characterizes the contact quality between adjacent layers. In lithium-ion battery manufacturing, acoustic reflectivity helps determine the wetness of electrodes and the presence of gas pockets. A lower reflectivity value suggests a tight interface with efficient transmission, whereas a higher value points to gaps or poor adhesion.
This measurement stops being reliable when the material thickness is less than one wavelength of the probing sound.
Reflection Coefficient
A couplant or contact medium determines the acoustic impedance matching at the boundary. The acoustic reflectivity behaves according to the acoustic impedance discrepancy between the sensor and the test object. Solid-gas boundaries generate a reflection coefficient close to unity, causing nearly complete energy return.
Solid-liquid interfaces display intermediate values, which makes the technique useful for tracking electrolyte absorption.
Signal Verification
Transducer selection determines the spatial resolution of the inspection. Higher frequencies narrow the beamwidth and resolve thinner layers, though they suffer greater attenuation in polymer materials. Signal amplitude measurements from the first boundary echo provide the data required to calculate the impedance transition.
Signal calibration against a steel block or a polished reference plate establishes the necessary baseline.
Industrial Testing
Dry regions in a cell prevent ion transport and increase the internal impedance of the assembly. Monitoring acoustic reflectivity during the electrolyte filling stage reveals where dry spots persist after the vacuum phase. This monitoring detects gas pockets before the cell undergoes formation cycling.
Eliminating these defective cells early reduces waste and ensures the uniformity of production lots. Solid-state batteries especially benefit from this technique because interface delamination between the electrolyte and the anode leads to rapid cell degradation.