Meaning
Transverse acoustic waves that propagate across the boundary between two materials evaluate the shear stiffness and bonding quality of the joint. In battery development, using an interface shear wave helps verify the adhesion between the current collector foil and the active material coating. This wave is highly sensitive to the presence of liquid or gas at the boundary because fluids cannot support shear stress.
The method does not apply to liquid-filled regions where shear wave propagation is impossible. For solid-state batteries, this technique is valuable for monitoring the solid electrolyte interface during charging, as the stiffness changes with lithium deposition.
Physical Mechanics
Unlike longitudinal waves, transverse waves vibrate perpendicular to their direction of propagation. This motion makes the interface shear wave exceptionally responsive to the friction and bonding state of the contact plane. In a well-bonded electrode, the shear wave passes easily into the adjacent coating with minimal reflection.
Delamination or sliding contact at the current collector foil causes a large reflection, allowing immediate detection of the manufacturing fault.
Measurement Setup
Dry-contact shear transducers or specialized couplants are required to generate and transmit these transverse vibrations into the cell. Normal ultrasonic gels only transmit compressional waves, which are less sensitive to shear slip. Utilizing high-viscosity shear couplants ensures that the wave crosses the cell casing with minimal loss.
This setup requires precise pressure control to keep the transducer firmly coupled to the casing.
Electrode Assessment
Coating adhesion is critical for preventing the active material from peeling away during the volume changes of cycling. Interface shear wave scans provide a non-destructive way to measure this adhesion across the entire surface of the electrode. This scanning is done before the cell is filled with electrolyte to ensure that the coating has been applied uniformly.
High shear transmission correlates with a long cycle life and low internal resistance.