Meaning
Numerical value quantifying the loss of energy as an ultrasonic wave travels through a medium. In material characterization, the attenuation co-efficient accounts for energy lost through scattering at grain boundaries and absorption within the lattice structure. It is expressed in decibels per unit length (dB/mm) and dictates the maximum depth at which a signal remains distinguishable from background noise.
Signal Decay
Loss of amplitude occurs as the sound wave interacts with the internal micro-structure of the part. This attenuation co-efficient determines the gain settings required to maintain a consistent signal-to-noise ratio across varying thicknesses. High values indicate a material that dissipates energy rapidly, necessitating lower frequency probes to achieve the required penetration depth for subsurface inspection.
Frequency Dependence
Acoustic scattering increases as the wavelength approaches the size of the material grains. The attenuation co-efficient typically rises with higher frequencies, which limits the resolution possible in coarse-grained materials like cast steel or heavy composites. Engineers select frequencies that balance the need for fine detail against the reality of signal loss over the required path length.
Test Limitation
Measurements become unreliable when the total energy loss exceeds the dynamic range of the receiving electronics. The attenuation co-efficient is influenced by temperature and frequency, meaning values recorded during a laboratory calibration might differ from those found on a production floor. Accurate assessment requires a reference block of the same material and thermal state as the component under test.