Meaning
Electromagnetic interference phenomenon occurs when signals on one conductive path transfer to an adjacent path within a high density circuit board. High frequency transitions induce backplane crosstalk through mutual inductance and capacitance between parallel traces. This unwanted energy transfer degrades signal integrity by introducing noise into the victim line.
Interference Path
Mutual coupling happens most severely when signal density is high and trace spacing is minimal. Designers typically calculate backplane crosstalk by measuring the voltage induced on a passive line while an active line switches. Capacitive coupling dominates at higher frequencies while inductive coupling prevails in high current scenarios.
Ground planes placed between signal layers provide a return path that contains the electromagnetic field. Proper shielding between layers is also a standard practice for high layer count boards.
Signal Impact
Reliable data transmission depends on maintaining a specific signal to noise ratio. Excessive backplane crosstalk leads to bit errors and reduced timing margins in multi gigabit links. Systems using high speed protocols require stringent limits on the near end and far end varieties of this noise.
Active cancellation techniques in some silicon transceivers help mitigate the degradation caused by these parasitic signals.
Design Constraint
Geometric layout dictates the magnitude of the disturbance in a finished board. Increasing the distance between traces is the most effective way to lower backplane crosstalk. Using lower dielectric constant materials also reduces the capacitive component of the interference.
Proper termination of all lines ensures that reflections do not exacerbate the noise levels observed at the receiver.