Meaning
Frequency instability represents the spectral energy of an oscillator located very near the fundamental carrier signal. Most measurements of close in phase noise focus on the region from 1 Hz to 10 kHz away from the peak. High quality resonators are necessary to minimize these fluctuations in sensitive radar and communication hardware.
Spectral Proximity
Noise levels usually drop as the frequency offset from the carrier increases. In the close in phase noise region, the slope of the power density curve provides insight into the internal physics of the oscillator. Flicker noise often dictates the performance at very small offsets.
Professional equipment measures this value in decibels relative to the carrier power within a one hertz bandwidth.
Resonator Quality
Physical construction of the timing source governs the magnitude of the signal spread. A high quality factor resonator effectively suppresses close in phase noise by storing energy more efficiently. Quartz crystals and sapphire oscillators are common choices for applications requiring extreme stability.
Environmental factors like vibration or temperature change can rapidly degrade these metrics.
System Performance
Narrowband receivers lose sensitivity when the local oscillator exhibits poor spectral purity. High levels of close in phase noise smear the signal across adjacent channels through reciprocal mixing. Digital modulation schemes with dense constellations require low phase error to maintain low bit error rates.
Selecting a reference clock with superior performance near the carrier is a fundamental requirement for satellite ground stations.