Meaning
Bimetallic composite strip combines a copper core with exterior nickel cladding through solid-state metallurgical bonding. Pack manufacturers implement copper nickel clad material in cell tab connections to achieve high electrical conductivity while retaining the resistance weldability of pure nickel. The composite specification applies directly to electrical interconnects and busbar ribbons and does not extend to pure monometallic foils or plated coatings.
Bond Integrity
High-pressure roll bonding forces atomic contact between copper and nickel layers without intermediate brazing alloys. Heat treatment after cold rolling initiates diffusion bonding, preventing delamination of the copper nickel clad strip during high-speed stamping operations. Ultrasonic scanning verifies interfacial adhesion to ensure that cyclic mechanical vibrations inside an operating pack do not separate the metallurgical layers.
Uniform layer thickness guarantees stable current distribution across the cross-section during high-amperage discharge pulses.
Weldability Profile
Outer nickel layers facilitate resistance spot welding onto cylindrical steel can terminals. Pure copper exhibits thermal conductivity too high for conventional resistance welders, whereas copper nickel clad concentrates weld energy at the outer nickel interface. Lower contact resistance at the joint reduces weld splash and prevents heat damage to cell seals.
Ampacity Benchmark
Cross-sectional copper content dramatically lowers voltage drop compared to solid nickel conductors of equivalent thickness. Replacing standard nickel strips with copper nickel clad doubles current carrying capacity while avoiding pack volumetric growth.