Meaning
Gradual loss of material from the internal and external surfaces of a fluid delivery nozzle or valve. Continuous friction from abrasive fillers in battery slurries or adhesives leads to dispense head wear over time. The degradation alters the internal geometry of the fluid path and changes the resistance to flow.
Abrasive Mechanism
Suspended particles such as ceramic beads or metallic flakes grind against the walls of the dispensing channel. Hardened steel or tungsten carbide components resist dispense head wear more effectively than softer alloys. The velocity of the fluid increases the rate of material removal through mechanical erosion and scouring.
Flow Deviation
Incremental changes in the diameter of the orifice result in a higher volume of material being delivered at the same pressure. Because dispense head wear is often uneven, the shape of the output stream may become skewed or unstable. Frequent calibration checks identify these shifts before the output falls outside of the acceptable quality range.
Service Life
Replacement schedules are determined by the hardness of the fluid components and the chemical nature of the adhesive. Monitoring the pressure drop across the valve provides an indirect measure of dispense head wear. Once the orifice exceeds a specific wear threshold, the consistency of the bond line cannot be maintained.
Failure to monitor these shifts leads to excessive waste.