Meaning
Precision electrical measurement technique eliminates lead resistance and contact resistance errors by separating current-carrying paths from voltage-sensing leads. Battery test systems rely on four-wire resistance measurements to quantify milliohm and micro-ohm values within cells, busbars, module interconnects, and terminal tabs. The method governs accurate DC internal resistance evaluation down to micro-ohm resolutions, stopping where AC impedance spectroscopy takes over for high-frequency phase angle analysis.
Measurement Principle
Voltage drops across test leads corrupt standard two-probe readings when assessing high-conductivity battery components. By forcing a known current through two outer force leads and measuring voltage across two inner sense leads, zero current flows through the measurement loop. Isolation ensures that lead length, contact oxidation, surface contamination, and terminal pressure do not distort calculated values.
Test Setup
Kelvin clips or spring-loaded coaxial pins establish contact at designated reference points on cell terminals or current collectors. High-precision source meters supply stable test currents while digital multimeters sample millivolt drops across the sense line. Automated battery cell sorters rely on this topology to classify cells by internal resistance at line speeds exceeding sixty units per minute.
In multi-cell pack quality control, automated relay matrices switch four-wire resistance channels across hundreds of weld nodes. Proper shielding of sense lines prevents electromagnetic noise from power electronics introducing measurement drift.
Cell Evaluation
Cell manufacturing specifications require strict micro-ohm tolerances to ensure balanced current distribution across parallel branches. Excessive internal resistance indicates poor tab welding or cathode coating defects. Incoming quality verification rejects cell batches exceeding specified resistance upper bounds.