Meaning
Microscopic zone of intense shear strain forms within a crystalline material as a result of the collective movement of dislocations along specific atomic planes. When a metal current collector undergoes mechanical fatigue, a plastic slip band acts as a precursor to the formation of surface cracks. These bands are visible as small steps or ridges on the material surface under high magnification.
Strain Localization
Stress concentrations occur where these bands intersect the surface or grain boundaries. Instead of uniform deformation, the material concentrates the energy into these narrow channels. This behavior is common in aluminum and copper foils used in battery cells.
Repeated loading makes these zones more pronounced. The orientation of the crystal grains influences where these bands appear. Coarse grained materials often show more distinct bands than fine grained ones.
Fatigue Initiation
Damage accumulates as the bands widen and eventually crack the protective oxide layer of the metal. Once the surface is breached, the electrolyte can react with the exposed metal. This leads to corrosion and a loss of electrical conductivity.
The lifespan of the current collector is limited by this mechanism.
Stress Boundary
Engineering limits are set below the level where these bands become permanent or widespread. If the strain remains within the elastic region, the material returns to its original state. Fatigue life calculations must account for the thickness of the foil.
Thin foils are more susceptible to the detrimental effects of localized strain.