Meaning
Additional voltage required to drive an electrochemical process at a desired rate represents the deviation from ideal reversible conditions. Thermodynamic overpotential quantifies the energy lost as heat during the charging or discharging of a cell. It is a fundamental property that dictates the round-trip efficiency of any battery chemistry.
Activation Barrier
Activation energy must be supplied to overcome the resistance of the chemical reactions at the electrode surfaces. This component of thermodynamic overpotential is known as the charge transfer resistance. It is most prominent at low current densities and varies with the catalytic properties of the materials.
Improving the surface area of the active material can reduce this hurdle.
Loss Mechanism
Mass transport limitations occur when ions cannot reach the electrode surface fast enough to sustain the current flow. Concentration gradients contribute to the total thermodynamic overpotential by increasing the voltage drop at the electrolyte interface. This effect becomes dominant at high discharge rates or low temperatures where the viscosity of the fluid is higher.
The electrolyte conductivity and the porosity of the electrode are the primary factors that determine the severity of this loss. Careful design of the internal geometry helps to mitigate these diffusion issues.
Efficiency Impact
Higher values for this metric result in lower usable energy and increased cooling requirements. Minimizing thermodynamic overpotential is a key goal for researchers developing fast-charging batteries. It directly affects the commercial viability of a product by determining its power density.
Systems with low losses are more attractive for high-performance applications.