Meaning
Electronic adjustment of the angle of an ultrasonic wavefront without physically moving the probe. In phased array ultrasonic testing, beam steering is achieved by applying precise time delays to each element in a multi-element transducer. This capability allows for the inspection of complex geometries and allows the sound to reach areas blocked by surface obstacles or weld caps.
Angular Sweep
Phased array systems use programmable delay laws to fire elements in a sequence that creates constructive interference at a specific angle. This beam steering enables a single probe to perform a sectorial scan, covering a wide range of angles from a stationary position. It reduces the need for mechanical scanning hardware and shortens the time required to map the internal volume of a weld or forged part.
Refraction Geometry
Changes in the incident angle occur according to Snell’s law when the sound passes from a wedge into the test material. Effective beam steering must account for the refractive index at the interface to ensure the sound reaches the intended depth and orientation. Precision in these delay calculations determines the accuracy of the defect positioning within the three-dimensional model of the component.
Aperture Restriction
Steering capability is limited by the pitch and width of the individual elements in the array. Excessive beam steering leads to the formation of grating lobes, which are unwanted side beams that can cause false indications or mask real defects. Operators must maintain the steering angle within a defined range to ensure the primary beam retains enough energy and focus for a valid inspection.