Meaning
Capillary flow porometry relies on the minimum pressure required to force a liquid out of the largest pores of a wet membrane to define pore size distribution. A higher bubble point represents a smaller maximum pore size, which prevents the passage of particulate contaminants in battery separator films. This prevents electrical shorts.
Capillary Pressure
Porous membranes hold wetting liquids within their internal channels by surface tension. Applying gas pressure to one side of a fully wetted separator gradually overcomes these capillary forces. Once the gas pressure exceeds the capillary pressure of the largest pore, a continuous stream of bubbles emerges.
The bubble point therefore identifies a physical crossover where gas displaces the liquid. This threshold dictates the hydraulic stability of the material under operational stress.
Measurement Protocol
Standardized testing utilizes specific wetting fluids with known surface tension to ensure reproducible results across different laboratories. Technicians mount the separator specimen in a sealed test cell and submerge it under a thin layer of the same liquid. Increasing the gas pressure at a controlled rate allows the operator to observe the first continuous stream of bubbles.
Automated systems record the pressure at this onset to eliminate human observation bias, which ensures the resulting data remains highly reliable.
Integrity Assessment
Quality assurance departments rely on the pressure value to verify the absence of structural defects or micro tears in incoming membrane rolls. A bubble point value below the specified minimum suggests localized thin spots or physical damage that occurred during manufacturing or handling. Such defects permit particle migration or localized dendrite growth.
Sourcing decisions depend on this metric to guarantee the long term durability of separator components.