Meaning
A mathematical framework represents the time-dependent deformation of polymers or soft battery components under constant mechanical stress. The burgers model combines spring and dashpot elements in series and parallel to simulate both immediate elastic response and long-term viscoelastic flow. This representation allows engineers to predict how separators and pouch materials behave under prolonged compression.
Viscoelastic Behavior
Mechanical stress on polymer separators causes slow polymer chain relaxation over weeks of battery operation. The viscoelastic behavior of burgers model calculations provides the parameters needed to calculate the loss of mechanical tension in wound cells. Using these parameters, developers choose materials that maintain separator thickness throughout the battery life.
Stress Relaxation
Compression of pouch cells within a hard module enclosure induces variable contact pressures during charge cycles. The stress relaxation of burgers model formulations determines the decay rate of this packing force as the soft components deform. If the force decays too far, electrical contact between internal active layers worsens.
Parametric Extraction
Dynamic mechanical analysis supplies the experimental data used to calibrate the spring constants and viscosity coefficients. The parametric extraction of burgers model variables requires fitting experimental creep curves under different temperature levels. By running these fitting routines, engineers establish the thermal limits of the battery pack packaging.
At elevated temperatures, the viscous dashpots in the model dominate the response, which accelerates the loss of clamping pressure and weakens the structural integrity of the module.