Meaning
A time-dependent mechanical property measures the ratio of strain to stress in materials that exhibit both viscous and elastic behavior. The viscoelastic compliance of separators and cell housings determines how these materials stretch or compress when loads are sustained over long periods. This metric is essential for designing cell modules that experience sustained swelling forces during charging cycles.
Stress Relaxation
Polymer separators under constant compression within the battery pack show a drop in force over time. The stress relaxation of viscoelastic compliance calculations allows engineers to predict the long-term contact pressure between electrodes. If the pressure drops too much, the internal resistance of the battery increases.
Dimensional Stability
Thermal shifts in the passenger compartment subject the battery module to alternating stress levels that can distort polymer assemblies. The dimensional stability of viscoelastic compliance behaviors prevents catastrophic alignment changes in critical electrical connectors. This stability is checked using creep recovery tests under simulated thermal profiles.
Material Selection
Dynamic mechanical tests characterize how different polymer formulations respond to variable mechanical loads at high temperatures. The material selection of viscoelastic compliance variables guides the choosing of composite plastics that resist deformation under sustained cell swelling forces. By selecting materials with low compliance, design teams ensure that the module casing retains its structural shape throughout the vehicle warranty period.