Meaning
Mechanical stress exerted perpendicular to the surface of a battery electrode stack defines the load profile. Maintaining optimal compression pressure prevents the delamination of active materials from current collectors during high rate discharge. This value is typically measured in megapascals and varies depending on whether the cell chemistry uses liquid electrolytes or solid state separators.
High loads improve conductivity but risk crushing delicate pore structures.
Structural Loading
Physical clamping provides the external force required to keep internal layers in proximity. When compression pressure is too low, the internal resistance rises because the conductive paths become intermittent. Heavy duty springs or foam pads often modulate this force to accommodate thermal expansion.
These components absorb the energy of swelling while maintaining a baseline contact force.
Resistance Impact
Electrical performance depends heavily on how tightly the layers are pressed together. Tight contacts reduce impedance.
Operational Limit
Excessive force causes mechanical failure of the separator or shorts between the anode and cathode. Maximum compression pressure is defined by the yield strength of the softest component in the stack. Exceeding this threshold results in irreversible plastic deformation.
Safety margins are established to ensure the separator remains porous under all temperature conditions.