Meaning
Measurement protocols for direct current internal resistance quantify the voltage drop observed when a specific current pulse is applied to a battery cell. These dcir calculations allow engineers to determine the purely resistive losses within the cell at a given state of charge. By subtracting the open circuit voltage from the voltage recorded during the pulse, the resistance value is derived via ohms law.
This metric is used to evaluate the power capability and thermal heating characteristics of the system.
Algorithmic Step
Precision in data logging is required to capture the instantaneous change in potential at the start and end of the load application. Most dcir calculations involve taking the difference between the rest voltage and the voltage after a defined period, often ten seconds. This duration includes both ohmic resistance and a portion of the polarization resistance.
Precise timing is necessary. Standardized intervals ensure that the resulting value remains consistent across different batches and testing facilities.
Performance Insight
Determining the ohmic health of a cell reveals how much energy will be converted to heat during rapid discharge. When dcir calculations show a trend of increasing resistance over time, it indicates the degradation of the electrolyte or the growth of the solid electrolyte interphase. Sourcing managers use these figures to compare the quality of different cell suppliers.
Low resistance values are preferred for high power applications like electric vehicles.
Boundary Condition
Temperature significantly influences the results of these mathematical models. Because dcir calculations depend on ionic mobility, a cold cell will show much higher resistance than a warm one. Tests must be performed in climate controlled chambers to ensure the validity of the data.
Without standardized thermal conditions, the resistance values cannot be used for life cycle modeling or pack level thermal management design.