Meaning
Verification sequence used to adjust for timing variations across multiple elements in a phased array system. This focal law calibration ensures that the intended delay profile is accurately executed by the instrument hardware and probe combination. It compensates for differences in the internal electronics, cable lengths, connector impedance and the thickness of the acoustic wedge or protective face.
Time Compensation
Electronic delays are programmed to fire elements at different intervals to focus or steer the beam. The focal law calibration process measures the actual time of flight for each element against a known target, such as a side-drilled hole or the backwall of a reference block. By normalizing these times, the system creates a uniform response across the entire active aperture of the probe.
Sensitivity Normalization
Variations in the piezoelectric response of individual crystals can lead to uneven signal strength across the array. During focal law calibration, the gain for each element is adjusted to ensure that a reflector at the focal point produces a consistent amplitude regardless of which elements are active. This step is necessary to produce a reliable image where the brightness of an indication corresponds to its size rather than the position of the probe.
Documented Accuracy
Calibration records provide the objective evidence required by industry standards for aerospace or nuclear inspections. A successful focal law calibration confirms that the system is operating within the specified tolerances for beam angle and focal depth.