Meaning
A diagnostic technique that plots the derivative of cell capacity with respect to voltage highlights electrochemical phase transitions occurring within the electrodes. Engineers use incremental capacity spectroscopy to identify specific degradation mechanisms without destroying the cell. This method transforms the flat plateaus of a standard voltage curve into clear peaks.
Each peak corresponds to a specific coexistence phase of the anode and cathode materials.
Mathematical Conversion
The technique calculates the change in capacity divided by the change in voltage during very slow charge or discharge cycles. Noise in the raw voltage data requires smoothing algorithms to prevent artifact peaks from distorting the resulting curve. When plotted, the peaks from incremental capacity spectroscopy reveal the thermodynamic state of the active materials.
These measurements are typically taken at regular intervals during the cell lifespan.
Diagnostic Accuracy
Shifts in peak positions and heights identify whether capacity loss is due to active material degradation or lithium inventory loss. For example, a downward shift in the anode peak indicates a loss of anode material, while a general reduction in all peaks suggests a loss of lithium ions. This level of detail exceeds what can be obtained from simple capacity tests.
It enables targeted maintenance strategies for large energy storage systems.
Sourcing Relevance
Battery buyers use this analytical tool to verify the quality of cells from new suppliers. Comparing curves from different batches helps detect inconsistencies in electrode manufacturing. This verification reduces the risk of installing unreliable cells in high-value packs.