Meaning
International specification establishes the method for determining the density of permeable and impermeable sintered metal materials. Testing against iso 3369 provides a standardized value for the mass per unit volume of a component. The scope includes materials where the porosity is either interconnected or completely sealed.
This standard establishes a baseline for comparing different production batches and materials.
Testing Procedure
Measurement involves weighing the specimen in air and then in a liquid of known density. While distilled water is common, the choice of fluid can vary depending on the chemical reactivity of the metal. For permeable parts, the procedure requires a vacuum impregnation step to fill the open pores with oil.
This prevents the liquid from penetrating the voids during immersion and ensures an accurate measurement of the external volume.
Specimen Condition
Integrity of the result depends on the surface being free of debris and loose particles. Because the iso 3369 calculation relies on small mass differences, even a thin film of grease or fingerprints can alter the final density value. Drying the part after oil impregnation is a delicate step that must be performed with lint free cloth.
Density Measurement
Calculation of the density uses the ratio of the mass in air to the volume derived from the displacement. Sintered metals often show variations across a single part, so multiple readings may be necessary to define the average property. This value determines whether the material meets the requirements of the final engineering drawing.
The result is expressed in grams per cubic centimeter.