Meaning
Transition metal carbides exhibiting a hexagonal close-packed crystal structure provide secondary hardening in molybdenum- and tungsten-bearing steels. The presence of m2c carbide precipitates maintains elevated temperature hardness by retarding matrix dislocation movement. Chromium and vanadium substitute partially into the metallic sublattice while carbon occupies interstitial sites.
Precipitation occurs during secondary hardening stages between four hundred fifty and six hundred degrees Celsius. The designation excludes stable cubic monocarbides and iron-rich cementite formations.
Precipitation Kinetics
Nucleation begins on lath boundaries and dislocation lines within the tempered martensite matrix. The fine needle or plate morphology of m2c carbide provides an optimal aspect ratio for blocking crystallographic slip. Molybdenum and tungsten atoms diffuse slowly through the matrix, controlling growth rates during tempering holds.
Extended thermal exposure causes transformation into more stable, coarser carbide phases that lower net yield properties.
Microstructural Stability
Resistance to coarsening enables retention of yield strength under elevated operational temperatures. Thermal exposure past six hundred degrees triggers the breakdown of m2c carbide into complex cubic carbides or monocarbides. Needle-like geometries convert to spherical particles, reducing the effective dislocation pinning efficiency.
Retaining fine dispersions ensures mechanical tooling maintains cutting edges and dimensional geometry under high friction loads.
Specification Boundary
Steel procurements for stamping dies and structural cell-forming tools designate explicit tempering cycles to produce target precipitate distributions. Certified inspection reports use X-ray diffraction and scanning transmission electron microscopy to confirm phase identity. Mill specifications set minimum molybdenum content to secure sufficient volume fractions of the precipitate.
Deviations in alloy chemistry that depress secondary hardening response cause tool rejection prior to final production machining.