Meaning
Interconnected network of void spaces that communicate with the external surface of a material allows for the ingress and movement of liquids or gases. This material property, known as open porosity, represents the fraction of the total volume that is accessible from the outside. It is a fundamental parameter in the design of filters and catalysts where fluid flow is required.
Unlike closed porosity, these voids do not contribute to the buoyancy of the material in the same way because they can fill with the surrounding medium. It determines the effective surface area available for chemical reactions. ~
Fluid Transport
Permeability of the material depends on the size and connectivity of the open pores. Large and well connected channels allow for rapid flow with low pressure drop. Conversely, narrow or tortuous paths restrict movement and increase the resistance to fluid transfer.
This characteristic is essential for the management of electrolyte in lead acid batteries and the diffusion of oxygen in metal air systems. ~
Surface Measurement
Archimedes principle allows for the calculation of open volume by comparing the weight of a dry sample with its weight when saturated with a liquid. The liquid must have a low surface tension to ensure it penetrates all the available spaces. Another method involves gas pycnometry, which uses the displacement of an inert gas to measure the skeletal volume of the solid.
The difference between the bulk volume and the skeletal volume defines the open void space. ~
Material Strength
Structural integrity decreases as the volume of open pores increases because the load bearing cross section is reduced. These voids also act as pathways for corrosive agents to enter the interior of a part. In cold environments, water trapped in open pores can freeze and expand, causing internal cracking and spalling of the surface.
Engineers must balance the need for fluid access with the requirement for mechanical durability.