Meaning
Tensile force acting normal to an adhesive or bonded interface along the immediate line of separation measures the mechanical resistance of laminated layers against progressive unzipping. In energy storage engineering, peel stress governs the mechanical integrity of coated active electrode materials adhering to metal foil current collectors, as well as the adhesion of laminated pouch film layers and surface-mounted cooling assemblies. The parameter establishes the threshold force required to strip coatings or protective packaging films apart under transverse displacement.
This mechanical scope focuses on interfacial separation kinetics, excluding pure shear sliding and uniform axial pull-off forces where the stress distributes evenly across the entire contact surface.
Interface Separation
Mechanical stripping originates at geometric edges or stress concentrations where out-of-plane forces concentrate. When a flexible substrate bends away from a rigid backing, the applied load does not distribute across the entire bond area, focusing instead entirely along a narrow line of boundary contact. This high local peel stress breaks the polymeric binder networks, such as polyvinylidene fluoride or styrene-butadiene rubber, that anchor active cathode or anode particles to smooth aluminum or copper foil substrates.
In pouch cell packaging, peel loads act directly against the heat-sealed polypropylene inner layer, challenging the hermetic barrier that protects the core against atmospheric moisture.
Coating Cohesion
Inadequate resistance to interfacial peeling induces widespread electrode delamination during continuous battery cycling. As lithium ions insert and extract from active host materials, graphite and silicon particles undergo volume expansion and contraction. These volumetric swings convert internal swelling pressures into localized out-of-plane forces.
If electrode peel strength is deficient, active material flakes away from the current collector foil, creating electrically isolated pockets that cease contributing to cell capacity. Delaminated active flakes can also penetrate separator films, instigating micro-shorts that elevate self-discharge rates.
Quantification Protocol
Laboratory validation measures interfacial adhesion using standard ninety-degree or one-hundred-and-eighty-degree peel fixtures mounted within universal testing machines. Standards such as ASTM D1876 or equivalent battery-grade internal specifications measure the steady-state force required to strip a defined width of coated electrode strip at constant displacement rates, yielding values in newtons per meter. Sourcing contracts enforce minimum peel strength thresholds on raw electrode coils before slitting, preventing edge burring, active mass flaking and coating detachment during automated winding or z-folding operations.