Meaning
Non-uniform distribution of alloying elements occurs across dendritic regions during the cooling of molten metals and alloys. Solidification microsegregation refers to this chemical inhomogeneity that occurs over distances of a few micrometres, typically within grain boundaries or dendritic arms. This defect can occur in the cast metals used for battery tabs, current collectors and metal anode foils.
It reduces the mechanical strength and electrical conductivity of the finished components.
Metallurgical Mechanism
Solute rejection at the solid-liquid interface drives the accumulation of alloying elements in the remaining liquid phase. During solidification microsegregation, this enriched liquid solidifies last in the interdendritic spaces, creating localized regions of high solute concentration. The severity of the segregation is determined by the partition coefficient of the alloying elements and the cooling rate of the melt.
Fast cooling rates can reduce the extent of this segregation by limiting the time available for solute diffusion.
Structural Effect
Compositional variations within the metal foils or tabs lead to localized areas of high mechanical stress and vulnerability to corrosion. Solidification microsegregation can be mitigated by applying post-solidification heat treatments to promote homogenization. These thermal steps allow the segregated elements to diffuse back into the depleted regions, restoring a uniform composition.
Electrochemical Performance
Inconsistent current distribution and localized heating can occur during battery operation if the current collector has non-uniform electrical resistivity. Eliminating solidification microsegregation is necessary to prevent premature failure of high-current battery connections. This uniform metal structure ensures consistent electrochemical performance and prevents localized stress points that could lead to tab fracture during pack vibration.