Meaning
Sensor device measures the strain of an object by translating mechanical deformation into a change in electrical resistance. A strain gauge consists of a fine metallic wire or foil etched in a grid pattern and bonded to a flexible substrate. When the substrate is stretched or compressed, the conductor length and cross-section change, altering its resistance.
This measurement allows engineers to calculate the stress and deformation of materials in real time.
Bridge Circuitry
Single sensors are rarely used alone because the resistance changes are small. Instead, the strain gauge is integrated into a bridge circuit that converts the resistance change into a voltage signal. This configuration also helps cancel out the effects of temperature changes on the metal foil.
Structural Monitoring
Battery enclosures use these sensors to track the expansion of cells during high-rate charging. If the internal pressure causes the housing to deform, the strain gauge provides an early warning of potential mechanical failure. This data helps in refining the mechanical design of the battery pack.
Bonding Process
Adhesive quality is essential for accurate data transmission from the surface to the sensor. A poorly bonded strain gauge will fail to capture the full extent of the material movement.