Meaning
Measurement of contact forces across the face of a battery cell using pressure-sensitive film provides high-resolution visualization of assembly pressures. This method utilizes a thin, specialized sheet that undergoes a chemical reaction and changes color when subjected to compressive pressure. The intensity of the resulting color change corresponds directly to the local pressure level, allowing engineers to identify high-pressure spots and uneven force distribution.
This tool is widely used during the development of module enclosures and compression pads.
Measurement Process
Engineers insert the sensor film between the cell face and the compression plate or neighboring cell during module assembly. The module is then subjected to the standard mechanical preload or thermal cycling to apply force to the film. After the test, the film is removed and scanned using a calibrated optical reader that converts the color density into a digital pressure map.
This high-resolution map reveals any areas of localized stress concentration that could lead to premature cell degradation or structural failure.
Design Modification
Analyzing the pressure distribution helps engineers modify the design of the compression pads and module end plates. If the pressure map shows high forces at the edges of the cell and low forces in the center, the end plates may be bending too much under the load. This information is used to adjust the structural design, such as adding ribs or changing the material of the end plates to achieve a more uniform pressure distribution.
Sourcing Relevance
Pressure mapping data is used to validate the mechanical performance of supplier prototypes during the design sign-off stage. Sourcing teams require this analysis to verify that the cell and module assembly meets the long-term reliability standards of the company.