Meaning
Material degradation on cutting edges refers to the localized fracturing of carbide grains under high mechanical load. Minute fractures known as carbide micro-chipping occur when the cutting edge of a slitting tool encounters high resistance during foil separation. These fractures reduce the neatness of the cut and increase burr formation.
The phenomenon is particularly problematic during high-speed processing of cathode foils.
Mechanical Wear
Mechanical stress and cyclic loading cause microscopic portions of the carbide matrix to dislodge. Continuous contact with hard electrode materials accelerates carbide micro-chipping along the primary shearing face. This localized failure alters the geometry of the blade, which compromises the uniformity of the sliced electrode.
Proper binder selection in the carbide composite can mitigate this micro-scale fracture.
Quality Derogation
Inconsistent slitting lines release loose metallic debris that can migrate into the separator. Elevated risk of internal short circuits results directly from carbide micro-chipping because the loose particles act as conductive contaminants. These defects bypass quality inspections if they are smaller than the detection threshold of optical systems, which threatens long-term safety.
Preventing such degradation ensures the electrochemical safety of the cell and stabilizes long-term performance.
Operational Cost
Premature blade replacement increases the frequency of production line stoppages. Minimizing carbide micro-chipping reduces the consumption rate of expensive tooling and improves overall factory efficiency. Blade life directly influences the operational expenditure of the manufacturing facility.