Meaning
Temporal duration required for a molten liquid particle to undergo sensible cooling, complete its latent heat of fusion release, and cool to a fully solid state during free flight defines droplet solidification time. In battery precursor and alloy powder atomization, this property governs the final microstructure, crystalline grain size, and shape regularity of particles intended for active materials or solid-state electrolytes. The calculation measures thermal transfer from the droplet surface to surrounding gas flows through radiation and forced convection.
The parameter ceases to dictate particle behavior once the droplet falls below its solidus temperature.
Thermal Transfer
Cooling rates during free flight depend on the relative velocity between droplet and atomization gas alongside the thermal properties of the atomizing medium. Small droplets exhibit short droplet solidification time because their surface-area-to-volume ratio accelerates convective cooling. High-conductivity gases like helium shorten this duration compared to argon, enabling rapid freezing of unstable chemical compositions.
Mathematical expressions balance latent heat liberation against convective boundary layer resistance, demonstrating that time scales roughly with the square of droplet diameter.
Microstructural Phase
Freezing duration determines whether a powder develops fine microcrystalline grains or segregates into coarse multiphase regions. Rapid cooling suppresses solute partitioning, which yields homogeneous alloy phases that enhance electrochemical stability during battery cycling. In contrast, extended droplet solidification time allows dendrite formation and elemental segregation, producing brittle or electrochemically inactive domains within the material.
Wall Impingement
Production equipment must accommodate the longest solidification times present in a given droplet size distribution. If flight paths are shorter than the distance traversed during this interval, semi-molten droplets strike the collection cone or tower walls. These impacts form dense crusts and satellite clusters that degrade batch yield and force mechanical sieving steps to remove irregularly shaped, non-spherical particles.