Meaning
Longitudinal shearing of electrode rolls can leave raised metal defects along the newly formed edges. The term foil slitting burrs refers to the unwanted metal protrusions that remain on the edges of copper or aluminum current collectors after mechanical slitting. These deformations occur when the cutting knives are worn or incorrectly aligned.
They are measured using microscopy to ensure they stay within quality limits.
Generation Mechanism
Mechanical division of metal sheets involves both plastic deformation and localized cracking. When foil slitting burrs form, it indicates that the shear knives have stretched the foil because of dull tool edges.
Hazard Consequence
Deformed metal edges represent a serious electrical failure hazard within the completed battery cells. If foil slitting burrs exceed five micrometers, they can easily pierce the polymeric separator during winding or under the swelling pressure of cell charging. This puncture creates a direct conductive path between the positive and negative electrodes, leading to rapid self-discharge or thermal failure.
Restricting burr height to minimal levels is essential for preventing these catastrophic internal short circuits.
Mitigation Method
Preventing edge defects requires a combination of tool maintenance and process optimization. To control the formation of foil slitting burrs, operators must enforce strict blade regrinding schedules and use precise mechanical spacers to maintain correct knife clearance. Active dust extraction and edge-brushing systems can also be used to remove loose metal particles.
These preventative measures sustain edge quality across production batches.