Meaning
Measurement of electrical voltage using separate pairs of current-carrying and voltage-sensing leads eliminates the influence of test lead resistance. Utilizing a four wire sense configuration ensures that the measured voltage reflects only the potential across the cell terminals. This approach is essential for high-accuracy battery testing where currents are high and cell resistance is very low.
It prevents the internal resistance of the test equipment from skewing the data.
Circuit Design
Current flows through the force leads, while the sense leads connect to a high-impedance voltmeter. Because almost no current flows through the sense leads, the voltage drop across them is negligible. This separation allows the system to measure the true cell potential.
It eliminates the contact resistance at the connection points from the voltage measurement.
Measurement Precision
Small variations in internal resistance of modern lithium cells require sub-milliohm measurement resolution. Two-wire setups cannot achieve this because of the unpredictable resistance of the test clips. A four-wire connection provides the repeatability needed to detect early cell degradation.
It allows developers to identify manufacturing defects before cells are assembled into modules.
Integration Challenge
Implementing this connection in high-throughput production lines requires specialized test fixtures and automated contact pins. These pins must make reliable dual contact with each cell terminal under high-vibration conditions. Sourcing managers must buy robust test fixtures to avoid frequent downtime from worn contacts.
The increased hardware complexity is justified by the reduction in measurement errors and false rejections during final quality control stages, where even a fraction of a milliohm error can classify a premium cell as defective.