Meaning
Purely resistive portion of electrical impedance that converts energy into heat without a reactive component represents the physical barriers to electron flow. Measurement of real ohmic resistance is the standard way to quantify losses in busbars, electrical connectors, wire harnesses and the internal chemistry of a battery cell. This value is independent of the frequency in a simple conductor but often accompanies capacitive or inductive effects in complex systems.
Conductor Material
Atomic structure and temperature of the metal determine the base level of electron scattering. When calculating real ohmic resistance, the cross-sectional area and the length of the conductor are the primary physical variables. Copper and aluminum are chosen for their low resistivity to minimize the energy lost as heat.
Impurities in the metal or poor crystal structure can increase the resistance beyond the theoretical minimum. Surface oxidation on terminals further increases this value over time.
Voltage Drop
Energy loss across a component is directly proportional to the current and the resistance value. High real ohmic resistance leads to substantial heat generation during fast charging or heavy discharge cycles. This heat can degrade the surrounding insulation or the battery cells themselves.
Management systems use these values to predict the thermal load on the cooling system.
Measurement Technique
Direct current methods provide the most straightforward way to isolate the resistive part of the impedance. Technicians apply a known current and measure the resulting voltage to determine the real ohmic resistance according to Ohm’s law. Four wire Kelvin sensing is required to eliminate the resistance of the test leads from the result.
This precision is necessary for identifying high resistance joints in a large battery pack.