Meaning
Integrated sensor configuration comprising multiple thin metallic or ceramic layers used to provide precise voltage references. A thin-film reference array allows for simultaneous measurement of electrochemical potential at several locations within a single cell or stack. These arrays are fabricated using vapor deposition or lithography to maintain a low profile that does not disrupt the internal flow of ions.
Sensor Construction
Microscopic layers of stable metals like platinum or gold are deposited onto a flexible polyimide substrate. Each element in the thin-film reference array acts as an independent point of comparison for local voltage measurements. The thickness of these sensors is typically less than one micrometer to minimize the impact on the stack pressure and the spacing between electrodes.
Protective passivating layers prevent the reference metals from reacting with the corrosive electrolyte during operation.
Functional Advantage
High spatial resolution enables the detection of localized defects that a single large reference electrode would miss. Data from a thin-film reference array helps in identifying the onset of lithium plating or the formation of gas pockets in real time. This information is necessary for the development of fast charging algorithms that push the cell to its limits without causing damage.
Monitoring the distribution of potential across the surface provides a clear picture of the state of health of the system.
Data Integration
Signal conditioning electronics multiplex the outputs from the various points to a central management system. The thin-film reference array requires high impedance buffers to prevent current leakage from affecting the accuracy of the readings. Calibration routines ensure that the drift of the reference potential is accounted for over the life of the sensor.