Meaning
Non-destructive testing of lithium-ion cells utilizes sound wave transmission to identify internal physical discontinuities without disassembly. In acoustic inspection, piezoelectric transducers generate high-frequency pulses that travel through the layered pouch or prismatic cell structure to map anomalies. The resulting density and boundary variations indicate where electrode delamination or electrolyte dry-out has occurred.
This assessment is restricted to physical gaps or density changes and cannot measure chemical degradation directly.
Detection Principle
Acoustic wave velocity and attenuation depend on the elastic properties and densities of the medium through which they travel. When acoustic inspection is deployed during manufacturing, it monitors slurry drying or wetting progress across the active area. Gaseous pockets block transmission, whereas liquid-filled networks allow waves to pass.
This provides a clear method to identify dry spots.
Signal Resolution
Transducer frequency dictates the depth of penetration and the minimum detectable size of an internal cavity. High-frequency signals provide high spatial resolution for micro-crack detection but suffer from severe attenuation in thick lithium-ion battery packs. Lower frequencies propagate through multiple cell layers at the expense of locating sub-millimeter voids or delamination boundaries.
Consequently, selecting the acoustic transducer involves balancing defect size sensitivity against total stack thickness, ensuring that internal manufacturing defects are reliably resolved before packaging. Testing at multiple frequencies provides a detailed depth profile of the cell.
Factory Integration
In-line automated testing stations use continuous transmission arrays to evaluate cell quality at the end of the assembly line. Because acoustic inspection requires dry coupling or fluid coupling, the equipment must be designed to avoid electrolyte contamination or physical cell damage. High-throughput plants prioritize dry, soft-tip probes that make temporary contact with the cell surface.
This automated check distinguishes structurally sound cells from those containing micro-structural faults before final formation and distribution.