Meaning
Permanent metallurgical connections between separate metal components are established by heating a filler metal above its liquidus temperature while keeping the base metals solid. Such a brazed joint relies on the distribution of the molten filler between closely fitted surfaces. The resulting bond provides both mechanical strength and a hermetic seal, which are essential in heat exchangers and cooling plates.
Capillary Attraction
Designing narrow clearances between the mating parts facilitates the flow of the molten alloy. In the assembly of a brazed joint, capillary force pulls the liquid filler into the gap to create a uniform interface. This action requires clean surfaces that are free of oxides, as surface contamination prevents the filler metal from wetting the substrate properly.
Thermal Integrity
Achieving high heat transfer efficiency across the joined metal plates depends on the absence of internal voids. When a brazed joint is used in battery cooling plates, any discontinuity in the filler metal layer reduces the thermal conductivity of the assembly. This localized reduction in heat transfer creates hot spots that can affect cell performance during rapid charging cycles.
Failure Mechanism
Thermal expansion during operation can initiate cracks at the edges of the bonded area due to mechanical stress. In a brazed joint, cyclical loading often leads to fatigue failure if the filler metal has a different thermal expansion coefficient than the parent metal. Over time, these microcracks propagate across the interface, leading to coolant leaks or total structural separation of the cooling plate.
This degradation is accelerated when the joint operates in corrosive environments, such as those exposed to road salt or moisture.