Meaning
Vertical displacement of metal foil edges along the slit perimeter defines the cathode burr height. Measurement of cathode burr height occurs through cross sectional microscopy or calibrated optical sensors after the slitting operation. This dimension governs the integrity of the insulation between adjacent electrode layers in a wound or stacked cell.
Excessive elevation of these jagged edges risks puncturing the separator, causing internal short circuits or thermal runaway.
Structural Variance
Manufacturing tolerances for cathode burr height typically remain restricted to a fraction of the separator thickness. Precision slitting equipment employs rotating shear blades to minimize the formation of these metallic protrusions. High speed production environments demand constant blade sharpness monitoring to prevent the accumulation of material deformities on the foil edge.
Performance Impact
Electrical performance degrades when cathode burr height exceeds designated safety thresholds. Protrusions creating contact points with the anode foil increase the self discharge rate through micro shorts. Consistent control of this parameter remains the primary defense against early life failure in high energy density cells.
Measurement Protocol
Optical inspection systems determine the peak vertical extent relative to the flat edge of the foil substrate. Calibration of the equipment follows standardized metallographic mounting procedures to ensure the accuracy of the profile capture. Automated vision software identifies the highest point of the burr to calculate the final height value across the entire length of the production run.