Meaning
Irreversible loss of available discharge capacity over repeated charge cycles or calendar aging defines the functional lifetime limit of an electrochemical cell. Quality engineers measure cell capacity fade by comparing current discharge amp-hours against the rated nominal capacity established during manufacturing. Mechanistic drivers include solid electrolyte interphase growth and cathode lattice degradation.
The metric applies strictly to permanent degradation and excludes temporary capacity suppression caused by low operating temperatures or self-discharge.
Degradation Mechanism
Parasitic side reactions at the anode interface continuously consume active lithium ions during cycling. Monitoring cell capacity fade exposes structural microcracking within nickel-rich cathode particles under high voltage stress. Electrolyte decomposition reduces active ion transport.
Electrode impedance increases over time.
Measurement Standard
Constant-current discharge testing at standard temperature determines the remaining full-charge energy retention of a cell. Quantifying cell capacity fade requires reference performance tests conducted under specified C-rates and controlled thermal conditions. Standardized cycling protocols isolate chemical degradation from thermal management artifacts.
Commercial Impact
Battery pack sizing calculations rely on end-of-life capacity retention thresholds to guarantee warranty commitments. Tracking cell capacity fade dictates when battery modules must be retired from primary automotive use into stationary storage applications. Accelerated capacity loss triggers premature replacement liabilities for pack assemblers.