Meaning
Manufacturing parameters used during the calendering stage define the final thickness and porosity of the electrode layers. Applying compaction pressure squeezes the dried slurry through a set of heavy rollers.
Density Optimization
Electrolyte wetting and ionic transport depend on the interconnected network of pores within the coating. If the compaction pressure is too high, the resulting low porosity restricts the movement of lithium ions and limits the high rate performance. This happens because the densified structure closes off the channels through which the liquid electrolyte must circulate.
Conversely, low density coatings lead to thick cells that cannot meet modern packaging requirements for automotive or portable electronics. Achieving the correct balance is necessary to ensure that the cell can provide both high capacity and fast charging capabilities without premature failure.
Particle Contact
Electronic conductivity within the electrode relies on physical proximity between the active material and the conductive additives. Moderate compaction pressure forces these particles together to create a continuous network for electron flow. This reduction in ohmic resistance improves the efficiency of the charging process and lowers the operating temperature of the battery.
Mechanical Stress
Excessive force during the densification stage can deform the underlying metallic foil or crush the active material particles. When compaction pressure exceeds the yield strength of the collector, it causes stretching or wrinkling that interferes with the subsequent winding process. The window for successful calendering is therefore bounded by the need for conductivity and the physical limits of the raw materials.