Meaning
Degradation of metallic surfaces occurring in the presence of fluorine or chlorine elements defines the operational limits of battery manufacturing equipment and cell components. Trace amounts of hydrofluoric acid formed from the decomposition of lithium hexafluorophosphate electrolytes often trigger halide corrosion within the battery casing. This chemical attack targets the protective oxide layers of aluminum current collectors.
Once the passive layer is breached, the underlying metal undergoes rapid dissolution. The severity of the damage depends on the temperature and the concentration of the aggressive ions in the surrounding medium.
Chemical Pathway
Pitting starts at microscopic defects where halide ions concentrate and penetrate the aluminum oxide film. The presence of a high electric potential accelerates this process during the charging cycle of the battery. Anodic dissolution releases metal ions into the electrolyte, which then migrate to the anode and deposit as solid metallic films.
Component Failure
Structural thinning of the current collector leads to increased electrical resistance and potential mechanical breakage. Internal short circuits can occur if the dissolved metals form conductive bridges across the separator. Heat generation increases at a measurable rate as the contact between the electrode and the terminal weakens.
Mitigation Strategy
Selection of high grade alloys and the application of protective carbon coatings reduce the vulnerability of the metal parts. Manufacturers also add specific additives to the electrolyte to scavenge free halide ions before they can react with the hardware. These preventative measures extend the calendar life of the energy storage device.