Meaning
Ohmic loss measurement quantifies the opposition to current flow at the contact point between two conductive battery components. Low joint electrical resistance is a requirement for high power battery packs to prevent localized overheating during fast charging. This value is measured in micro ohms and depends on the surface area and contact pressure.
Thermal Management
Energy lost as heat at a junction is proportional to the square of the current multiplied by the resistance. High joint electrical resistance can lead to thermal hot spots that degrade the surrounding cell insulation or trigger a fire. By keeping these values below a specific milliohm target, the cooling system can operate more efficiently and extend the overall life of the pack.
Measurement Technique
Four point Kelvin probing is the standard method used to bypass the resistance of the test leads themselves. To accurately determine joint electrical resistance, probes are placed on either side of the weld or bolted connection while a known current is applied. Consistent probe placement is needed to ensure repeatable results across thousands of identical connections in a production line.
Production Quality
Variations in resistance often point to issues like surface contamination or insufficient weld penetration. Automated test stations record the joint electrical resistance for every single link in a module to build a digital twin of the battery. If a reading exceeds the quality limit, the assembly is automatically rejected for manual rework.
High resolution logging of these values allows manufacturers to identify trends in tool wear and predict when maintenance on welding equipment is required before faults occur.