Meaning
Lithium plating occurs when ions cannot intercalate into the anode fast enough during a cold weather event. This low-temperature charging degradation creates metallic deposits that permanently reduce the available lithium and increase the risk of internal shorts. The damage is cumulative and accelerates with each charge cycle performed in the cold.
Kinetic Inhibition
Reduced ion mobility through the electrolyte and the solid electrolyte interphase slows down the transfer of charge. This kinetic inhibition forces the anode potential below zero volts versus lithium, making the deposition of metal more favorable than intercalation. Low-temperature charging degradation is therefore a function of both the temperature and the charging rate.
Anode Damage
Structural changes to the graphite or silicon layers happen when the surface is covered in dendrites. Over time, low-temperature charging degradation causes the separator to fail as these metallic spikes grow. This damage is often hidden until the cell is disassembled for forensic analysis.
Operating Limitation
Thermal management systems are integrated into packs to prevent the battery from reaching dangerous zones. These heaters must engage before the charging current starts to flow to avoid low-temperature charging degradation. Strict software limits on current density at low temperatures are the primary defense against this loss of capacity.