Meaning
Electrochemical measurement techniques employ complex waveforms to characterize the internal resistance and capacitance of a battery across a broad frequency spectrum. The multisine perturbation combines several individual sinusoids into a single input signal that is applied to the cell. This technique allows the battery management system to capture the full impedance response in a fraction of the time required for sequential single-frequency tests.
Signal Acquisition
Extracting the data requires sophisticated processing to separate the responses of the different frequencies. Because the multisine perturbation contains a known set of frequencies, the resulting voltage or current can be decoded using a fast fourier transform.
System Linearity
Validation of the measurement depends on keeping the amplitude of the signal small enough to maintain a linear relationship between voltage and current. If the perturbation is too large, the battery will exhibit non-linear behavior that distorts the impedance data. Engineers must carefully design the crest factor of the waveform to maximize the signal-to-noise ratio without exceeding the linearity limit.
Diagnostic Speed
Rapid assessment of the state of health is the primary commercial benefit. In an operating vehicle, the ability to perform a multisine perturbation provides an immediate snapshot of the internal condition of the cell. This allows for the quick detection of manufacturing defects or accelerated aging.