Meaning
Compacted mass per unit volume of an electrode coating is measured after the calendering step in cell manufacturing. Achieving the correct press density balances the need for high volumetric energy density against the retention of sufficient pore volume for electrolyte wetting. This metric applies to both anode and cathode coatings before cell assembly begins.
Calendering Process
Heavy rolls apply high mechanical force to the coated metal foil to compress the active layer. Control of press density requires precise regulation of roll temperature and gap width. Over-compression must be avoided to prevent particle fracture or substrate deformation.
Electrochemical Influence
Higher compression reduces the contact resistance between active particles and the current collector. However, excessive press density restricts the rate of lithium-ion diffusion by reducing the pore size and increasing tortuosity. This diffusion limitation decreases the rate capability of the battery under high discharge currents.
Electrolyte absorption rates drop significantly when the porous network is too tightly squeezed. This slow wetting process increases the required formation time during cell finishing.
Sourcing Standard
Material specifications define the target compressed density for each specific active chemistry. Sourcing teams use press density as a quality gate for coated electrodes delivered by subcontractors. Consistent density ensures uniform cell performance across production batches.