Meaning
Self-sustaining exothermic decomposition occurs when internal heat generation exceeds the rate of heat dissipation within an electrochemical cell. A thermal runaway hazard arises because this unchecked temperature rise triggers further reactions, releasing stored chemical energy as gas and fire. Rapid voltage drop combined with elevated surface temperature signals the progression of this failure mode across affected battery components.
Process Dynamics
Internal cell shorting initiates the rapid energy release that constitutes the event. Current paths through the separator fail under heat stress, allowing electrode contact and localized boiling of the electrolyte. This chemistry creates a pressure surge capable of rupturing the cell housing.
Gases produced during this breakdown carry additional chemical energy that feeds subsequent combustion cycles.
External Influences
Mechanical damage or electrical abuse forces the cell into an unstable thermal state. High ambient temperatures decrease the safety margin between normal operation and the onset of uncontrolled heat production. External heating sources accelerate the degradation of protective solid electrolyte interphase layers on the anode surface.
Charging the cell beyond defined voltage limits pushes the cathode material toward an unstable state where oxygen release occurs, providing fuel for the internal fire.
Detection Metrics
Monitoring surface temperature and cell gas composition provides a basis for predicting the onset of this dangerous condition. Voltage variance across parallel strings serves as a warning of an incipient fault before the release of thermal energy occurs. Industrial battery management systems rely on these observations to disconnect failing modules from the primary power bus.
Effective intervention stops the sequence of events before the failure propagates to adjacent cells in a pack.