Meaning
Standard test method that governs the determination of metal and oxide coating thicknesses using cross-sectional microscopical examination. This protocol, known as astm b487, outlines the laboratory steps for mounting, grinding, polishing, and measuring the cross section of a plated specimen. Precision in these preparation phases prevents smear of soft coatings over harder substrates.
Laboratory Procedure
Specimen preparation begins with cutting a representative sample to expose the boundary between the deposit and the base metal. Solid mounting in a plastic resin ensures the specimen remains flat during the abrasive polishing stages. Inadequate mounting yields rounded edges that distort the apparent thickness under optical magnification.
The selection of the polishing compound also affects the final relief between layers, necessitating graded diamond compounds or fine alumina slurries for the final steps.
Measurement Accuracy
Optical calibration utilizes a stage micrometer to verify the accuracy of the microscope reticle or imaging software. Because the method relies on visual boundary identification, a clear etch is required to distinguish the coating from the substrate. This direct observation provides a physical baseline against which non-destructive electronic gauges are calibrated.
Operational Limit
Resolution thresholds restrict the utility of the test below a certain thickness. Measurements become unreliable when the deposit thickness is less than about two point five micrometres. Beyond this physical limit, alternative techniques such as coulometric or electron microscopic methods are preferred.