Meaning
Displacement of stacked or folded internal cell components relative to one another destabilizes the internal geometry of pouch and prismatic batteries. Occurrence of internal stack slippage shifts electrode plates and separator sheets out of alignment under mechanical vibration or cyclic swelling forces. This displacement alters intended overhang margins, raising the risk of edge micro-shorts and localized lithium plating.
Mechanical Driver
External vibration and internal volumetric changes drive layer movement over time. Anode expansion during lithiation generates cyclic compressive stresses against cell housing walls. When internal friction between separator films and electrode coatings falls below dynamic shear forces, internal stack slippage occurs during vehicle movement or mechanical shock events.
Insufficient initial stack pressure and smooth separator coatings reduce friction, allowing layers to slide laterally.
Structural Degradation
Misaligned cell layers disrupt uniform current distribution and accelerate localized degradation. Shifted electrode edges reduce cathode-to-anode overhang ratios, allowing lithium ions to deposit as metallic dendrites along negative current collector margins. Prolonged internal stack slippage causes separator buckling and direct contact between current collectors.
Internal short circuits resulting from structural displacement lead to thermal runaway.
Inspection Protocol
Nondestructive imaging methods detect layer misalignment within sealed cell enclosures. Industrial X-ray computed tomography scans reveal internal stack slippage without compromising cell casing integrity. Inspection criteria establish maximum allowable edge offset limits for production cell acceptance.