Meaning
Chemical reference compounds are added in known concentrations to both samples and calibration standards to compensate for analytical variation. By monitoring the response of these internal standards, analysts can correct for sample loss during preparation and instrument drift during measurements. The selected compound must exhibit similar chemical behavior to the target analytes but remain distinct from any naturally occurring components in the sample.
This technique improves the precision of quantitative analysis in complex electrochemical outgassing studies.
Selection Criteria
Isotopically labeled compounds often represent the ideal choice for mass spectrometry because they share identical chemical properties with the analytes. In chromatographic studies, internal standards are selected to have retention times close to the target species without overlapping their peaks. If the chosen standard reacts with the sample matrix or the carrier solvent, it degrades and produces false calibration adjustments.
Researchers carefully evaluate the chemical stability of the reference compound under the specific extraction and analysis conditions.
System Compensation
Ratio calculations between the analyte signal and the reference signal eliminate errors caused by injection volume variations. Even if the instrument delivers slightly different sample volumes, the relative peak areas remain constant. This mathematical correction provides high quantitative accuracy despite mechanical variations in the syringe or injector.
Addition Procedure
Precise volumetric pipetting introduces the reference compound directly into the extraction solvent before any sample preparation occurs. This early addition ensures that any subsequent loss during filtration or concentration affects both the analyte and the internal standards equally. Consequently, the final calculated concentration remains unaffected by sample recovery losses during preparation.