Meaning
Force measurement transducers convert mechanical stress into measurable electrical signals to monitor compressive or tensile loads. In battery testing, load cells are placed within cell fixtures to track the expansion forces generated during cell breathing and swelling. This continuous monitoring prevents damage to cells and ensures they operate within safe mechanical limits.
Transducer Mechanism
Internal strain gauges bonded to a metal deforming body experience changes in electrical resistance when a force is applied. As the battery expands against the test fixture, load cells register this strain and output a proportional voltage signal. This analog signal is then digitized to provide real-time force feedback to the control system.
Cell Characterization
Continuous tracking of compression force under constant-volume conditions reveals the mechanical stresses that develop as cells age. By utilizing load cells during lifetime cycling, researchers can identify when the internal pressure starts to rise exponentially, which often indicates accelerated degradation. This information allows engineers to adjust the initial module pre-charge forces to extend battery lifespan.
Selection Criterion
Sensor capacity must be matched to the expected maximum swelling force of the chemistry. If the load cells are undersized, they will saturate or suffer damage during testing. Oversized sensors will yield insufficient resolution.